TRIO.BAS Accessories

GLP EASY RACK AISI 316 Contact - capacity up 15 Contact plate 55mm. size: diam. 110x215h mm. - weight 285 gr.

Cleanroom Stainless Steel Rack with handle for stacking, storing, and transporting culture plates (Petri or Contact plate). They are used to maintain the distance inside the incubator according the GLP* (Good Laboratory Practice).

DETAILS

• They can be refrigerated, incubated and autoclaved
• Each rack can hold up to 11 Petri dishes, or 15 Contact plates
• A wide front opening permits easy access but prevents dishes from sliding out
• The same rack can be adjusted for Petri or Contact plate
• Avoids all risk of accident during loading and transport to the incubator for staff bio-hazard safety
• The weight of only 280 gr. make it light and easy to carry
• The small size allows to maximize the space inside the incubator
• Racks are fully autoclavable

*ISO Standard and GPL request that inside the incubator the culture plates are stacked not more than six and at a distance of 2 cm.

GLP EASY RACK AISI 316 Petri - capacity up 11 Petri dish 90 mm. size: diam. 110x215h mm. - weight 285 gr.

Cleanroom Stainless Steel Rack with handle for stacking, storing, and transporting culture plates (Petri or Contact plate). They are used to maintain the distance inside the incubator according the GLP* (Good Laboratory Practice).

DETAILS

• They can be refrigerated, incubated and autoclaved
• Each rack can hold up to 11 Petri dishes, or 15 Contact plates
• A wide front opening permits easy access but prevents dishes from sliding out
• The same rack can be adjusted for Petri or Contact plate
• Avoids all risk of accident during loading and transport to the incubator for staff bio-hazard safety
• The weight of only 280 gr. make it light and easy to carry
• The small size allows to maximize the space inside the incubator
• Racks are fully autoclavable

*ISO Standard and GPL request that inside the incubator the culture plates are stacked not more than six and at a distance of 2 cm.

IN-REST holder - Stainless steel AISI 316 - size 90x120x105H mm - weight 127 gr.

Operators, and their activities, represent the greatest risk of contamination inside cleanrooms. Operators must work under stringent conditions; required to wear special overalls, gloves, facemasks, and eye masks. For these reasons, it is advisable to create the best possible working conditions. Air sampling with microbiological samplers is a complex and delicate operation, whether using an instrument with a single aspirating head, or an instrument with more than one aspirating head. To facilitate operations and avoid errors and risks of contamination during the sampling phase, the TRIO.BAS IN-REST is particularly useful as a temporary support for culture media plates and/or lids, and instrument sampling heads.

FEATURES

• Built in AISI 316 stainless steel
• Wedge shape inclined at 150°
• Two-sided Support
• Usable for Petri dishes, Contact plates and aspirating heads
• A single hole on one side, and two holes on the other side, facilitate identification of plates and heads

For remote system.

Remote Stainless Steel Tri Clamp Aspirating Funnel System

• This sampling system is completely fabricated in AISI 316 rated stainless steel
• The TRI CLAMP connection simplifies all the cleaning/sterilization operations
• The risk of contamination associated with operator activities is reduced

(*) different sizes on request

Inkluderar TB261, TB331, TB465, TB265, TB397

TRIO.CPS (TRIO kontaktprovtagare)

• TRIO.CPS (Kontaktprovtagare) hjälper till att standardisera ytövervakningen med traditionella kontaktplattor

• TRIO.CPS används med en kontaktplatta (t.ex. RODAC) diameter 55 mm. Tio sekunders timer garanterar att uppfylla ISO 18593 för horisontell ytprovtagning.

• Resultaten blir jämförbara med olika operatörer.

• Metallbotten medför en desinfektion/sterilisering.

• CFU räknas vid slutet av inkubationen och resultaten rapporteras som CFU / cm2 eller CFU / platta.

TEKNISK SPECIFIKATION

Timer: 10 sekunder

Arbetstemperatur: 0-40 ° C

Mått: 10x3 cm

Location Barcode TAG - Size 85x55 mm - 10 per box, used to personalize the location where the sampling is made.

User Barcode TAG - Size 85x55 mm - 10 per box,  used to personalize the operators working with microbiological air sampler.

BAS Software license - transfer data from instrument or smartphone/tablet to PC by Bluetooth.

This software is compliant with CFR 21 Part 11 Data Integrity. It manages the sampling data transfer from the air sampler to the PC. It also facilitates the configuration of users and places on the air sampler.

Android APP “BAS” för att överföra data till Smartphone / surfplatta och sedan via kabel till PC (alternativ till programvara för nedladdning av data)

PORTABLE COMMAND UNIT CPU - 10”

This device comes with already installed APP Android ASAPP.

The CPU Portable Command Unit is an ideal instrument to simplify and to facilitate the activity of operator.

The Bluetooth connection with all TRIO.BAS™ instruments allows to download the sampling data.

The PCU can also be used to control the switch on, switch off and pause of the air sampler remotely.

The data downloaded from the instruments through the CPU, can be transferred to a PC where Air Sampler ASPC software (code 295) or BAS software (code 296) is installed (i.e. by USB connection).

APP Android "BASAPP" - transfer data from instrument to smartphone/tablet by Bluetooth.

• Batterierna laddas när provtagaren är i viloläge
• Ingen laddningssladd krävs för instrument
• Luftprovtagaren är fri från externa kontakter
• Basstationens induktionsbatteriladdare kan bytas ut mot SELFTEST SYSTEM för att verifiera korrekt flödeshastighet med jämna mellanrum
• USB-uttag för anslutning och laddning av andra externa enheter (Bluetooth-skrivare, smartphone, streckkodsläsare etc.)
• IP65-damm- och vattentät certifiering
• ISO 9001 överensstämmer

Metallhuvudet är tillverkat i polerat AISI 316 rostfritt stål. De är individuellt testade och har ett identifieringsnummer enligt GLP och GMP.

• Har en lätt vikt vilket bidrar till en enkel hantering av luftprovtagaren.

• Med bajonettfattning är det enkelt att sätta på metallhuvudet på luftprovtagaren utan onödiga rörelser.

• Huvudet har 221 kalibrerade hål - 1 mm diameter.

• För varje luftprovtagningscykel, eller provtagningar i samma kontrollerade miljö, används ett steriliserat huvud.

• Varje metallhuvud bör steriliseras genom autoklavering.